Back to all

Automotive Tips from Tuffy Kentwood (Kalamazoo Ave SE): Brake Noise

August 20, 2017

Your brake pads are the important parts that rub against the rotor (or disc) to slow and stop your car when driving in Kentwood. They eventually wear down.

When your pads are worn too much, they won’t stop your vehicle as well. When the friction material is worn away, metal parts of the pad are exposed and you’ll hear a squeal or grinding sound.

That’s when Kentwood drivers should replace their brake pads at Tuffy Kentwood (Kalamazoo Ave SE). Not only will new pads restore your stopping power, but replacing them on time will prevent damage to the rotor.

If your brakes are making noise, ask your Tuffy Kentwood (Kalamazoo Ave SE) service advisor to inspect your brakes. Addressing problems early will restore your safety and prevent expensive brake damage.

Tuffy Kentwood (Kalamazoo Ave SE)
4384 Kalamazoo Ave. SE
Kentwood, Michigan 49508
616.301.1436

More articles from Tuffy Kentwood (Kalamazoo Ave. SE)

Getting Off to a Running Start (Starter Replacement)

November 17, 2024

When you start your vehicles engine, theres another motor that makes that whole process possible. Its called the starter, and its a small electric motor that gets your vehicle running. As you can imagine, its quite a chore for a little electric motor to turn over the big engine that powers you... More

What's in a Number? (What Tire Numbers Mean)

November 10, 2024

You've probably never paid much attention to the writing on the sides of your tires, but they contain a wealth of information. There's a long combination of letters and numbers that can tell you a whole lot about what tires your vehicle was designed to be riding on. Let's check out this example... More

U and your U-Joints (Lubricate U-Joints)

November 3, 2024

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More